M160EU M160EU

Woven from glass fibres coated in a special latex that is resistant to chemicals and alkalines Rendermesh adds strength, prevents cracks at areas of stress and protects against impact damage such as that can occur when ladders are leant against a wall. Rendermesh is sutable for use in all render, EWI, ETICS and plaster applications

Performance: design data

Affiliations

Applications

All standard rendering and internal plastering applications, external wall insulation systems, timber frame. Provides crack resisting and impact resistant strength to wall coatings

Chemical

Zero chemical reaction with water, sand and cement, acrylic render, water based paint; avoid contact with solvents

Durability

Impact and stretch resistant; minimises cracking, indentation and puncture damage

Economics

Environment

Manufactured to all UK and EU standards using only materials allowable under REACH

 

Fire

Inflammable, will not contribute to the combustion of the system

Health and Safety

Rendermesh is safe to handle removing the dangers of cut metal; gloves should be worn if handling cut thread to avoid micro fibres; if micro fibres come into contact with eyes rinse for 15 minutes in water holding eyelids wide open

Heat

Ideal for all habitable climates

Guarantees

Fit for purpose for the lifetime of the render and at least 25 years

Mechanics

Meets equivalent British Standard for metal lath BS EN 13658-2:2005 and BS EN 13496:2013 for thermal insulation products for building applications

Pollution

Ecologically benign when complete; non-hazardous in water; does not release substances into the atmosphere unless in contact with solvents or if shredded; if ingested seek medical assistance

Strength

For all applications requiring strong reinforcement

Weather

Not affected by weather and should be specified in all regions including those with high temperature or climate variation

Specification: standard data

Type

M160EU

Authority

Manufactured to ISO 9001:2000; complies with BS EN 13914-1:2005, BS EN 13496:2013,  BS EN 13658-2:2005 and ETAG 004 System 2+; complies with REACH

Brand Names

Renderplas; Rendermesh

Description

160gsm glass fibre reinforcement mesh

Composition

Woven glass fibre mesh coated carboxylated styrene butadiene copolymer latex

Dimensions (mm)

1m wide and has a 4.5-5mm weave

Depth (mm)

For all render depths

 

Weight (kg/100m)

8kg

Stock Colours

White

Length

50m

Packaging

Available singly in clear polythene sleeve or palletised in multiples of 30

Format

Price (£/100m)

139.96

Recycled
Content %

Light

Site works

Installation

Standard industry practice or guidelines stipulated by the system manufacturer should be followed for installation. In most cases Rendermesh should be embedded into a base coat of render or plaster. Lay the mesh flat against the base coat with no wrinkles or creases and using a trowel, push the mesh into the top third of the base coat so that the mesh cannot be seen. Where 2 or more sheets of mesh are used they must overlap by 100mm where they meet.

 

Storage

Store away from extreme temperatures. Can be stored flat or vertically. Avoid creasing or kinking

Supply

Ex-stock next day delivery to site through extensive supply chain or direct from www.renderplas.co.uk